FREE SHIPPING ON EVERY ORDER

Cut

Math is the determining factor in deciding the cut of a diamond. Every diamond is cut according to an exact mathematical formula. The most common cut, the round brilliant, has 58 facets, or small, flat, polished planes designed to yield the maximum amount of light to be reflected back to the viewer.

This reflection, known as brilliance, is an extremely important factor in evaluating the quality of a diamond. A poorly cut diamond will actually lose light and appear dull. The two most common
mistakes in cutting a diamond are:

Too Deep:
Light escapes out the sides causing the diamond to appear dark and dull.

Too Shallow:
Light is lost out the bottom causing the diamond to lose brilliance.

Proportions

A diamond's proportions refer to the Table Diameter, the Pavilion Depth, the Crown Angle, the Girdle Thickness and the Culet Size. The calculations of these factors are confusing and involved, requiring complex mathematical formulations and expensive equipment to measure and calculate.

Diamond Anatomy

Table
The topmost and largest facet of a diamond
Facets
One of the small, flat surfaces that is polished on a gemstone to increase brilliance and beauty
Girdle
A narrow band which runs around the circumference of the diamond
Crown
The top portion of the diamond which extends from the girdle to the corner of the table

Pavilion
The bottom part of a diamond which covers the area between the girdle and culet

Culet
The bottom most part of a diamond

Depth
The height of a diamond

 

A diamonds brilliance is affected by:

a) The depth of the diamond compared to its diameter
b) The diameter of the table compared to the diameter of the diamond


Polish and Symmetry


Polish

All the facets of a diamond are not equally hard, it is therefore possible to polish and shape a diamond.
The polish rating refers to the minute lines left on the diamond after the polishing process; these lines are straight in appearance. After cutting, each diamond facet is polished to improve the appearance and light return and so it is important to note all facets when considering this grade. If one of these facets has a burn mark from the polishing process then this will significantly affect the rating even though this may be unnoticeable when the diamond is set. A polish grade of good or higher will normally mean that no polish lines are visible to the unaided eye. However, below this rating polish lines may be visible, significantly reducing the overall brilliance of the diamond.


Symmetry

Symmetry refers to the alignment of a diamond’s facets and its overall fire and brilliance. The light bounces around inside a diamond reflecting off the facets, if the facets are not properly aligned then the light will not be returned through the top of the diamond into the eye*. The symmetry of a diamond has an important influence on the overall appearance of the diamond, for example if a round diamond has poor symmetry then the overall appearance will not be round as the different sides of the diamond will not look the same.

* The term Hearts and Arrows is used to describe the visual effect achieved in a round diamond with perfect symmetry and angles, once this type of diamond is set the hearts and arrows pattern will not be visible.


Diamond Pricing

Whilst the Color, Clarity and Carat of a diamond are a good indication of the overall appearance of the diamond you will receive, they will often not be the final determining factors in the brilliance of the diamond and therefore the price of the diamond. Being that 98% of a diamond’s brilliance is controlled by the quality of its Cut those interested in the most brilliant diamond should be aware of the diamond Cut. The industry has made this synonymous with the shape of the diamond but these are very different. When we refer to a diamond Cut we are in reality referring to the compilation of three main factors, these are the proportions, polish and symmetry of the facets of the diamond. It is important to understand these terms when comparing what may appear to be equal diamonds in terms of their Color, Clarity and Carat weight with significant price differences:


Classification of Cut

All loose diamonds offered for sale are independently certified by recognized grading laboratories.

It should however be noted that the different laboratories each use slightly different criteria with which to grade diamonds, and for this reason the same diamond could be graded by three independent laboratories and come back with three slightly differing reports.

We understand that this can make it very hard to compare diamonds that have been graded by different laboratories, and in recognition of this fact, our experienced in-house experts assign each diamond with a grade based upon current market trends and standards.

NO PAYMENT + NO INTEREST If paid in full in 6 Months on all purchases. Subject to credit approval. See terms